FloraMicro®

Advanced Nutrient System General Hydroponics

FloraMicro® is part of FloraSeries®, the O.G. 3-Part Hydroponic-Based Nutrient System. More than 40 years ago, when the other guys were still in grade school, our scientists were hard at work with a mission: to give growers a consistent and precise way to feed their plants through every growth phase. First formulated in 1976, FloraSeries® is the original 3-part hydroponic-based nutrient system consisting of FloraGro®, FloraBloom® and FloraMicro®. Good things really do come in threes.

Now it’s easier than ever to try the fan-favorite Flora Series® system with our cost-effective Trial Pack.

Available sizes

The O.G. 3-Part Hydroponic-Based Nutrient System

More than 40 years ago, when the other guys were still in grade school, our scientists were hard at work with a mission: to give growers a consistent and precise way to feed their plants through every growth phase. First formulated in 1976, FloraSeries® is the original 3-part hydroponic-based nutrient system consisting of FloraGro®, FloraBloom® and FloraMicro®. Good things really do come in threes.

Plant Nutrition for Every Growth Stage

By using different combinations of FloraGro®, FloraBloom® and FloraMicro®, you can help fulfill your plants’ nutrient needs at every stage of growth in all kinds of environments, for happy plants from seed to bloom. Adjust how much and when you use each to create your own personal recipes. Then grow knowing your nutrients are optimized to deliver the primary, secondary and micronutrients that push serious growth and brag-worthy blooms all season long.

Beautifully Balanced for Big Growth

FloraSeries® is formulated to help feed the right minerals, in the right ratios, to help plants flourish. Each formula is carefully proportioned for balanced nutrition. Too much or not enough of a particular element in a plant’s diet can lead to deficiencies and toxicities. We work to ensure FloraSeries® provides proper balance by batch-testing our products in a state-of-the-art lab with tight quality control.

For use with

Plants

  • Hemp
  • Vegetables
  • Herbs
  • Fruits
  • Flowers
  • Other high value crops

Media

  • Rockwool
  • Potting mix
  • Coco
  • Peat lite mix
  • In-ground soil
  • Water culture

Guaranteed analysis

  • n5
  • p0
  • k1

Derived From: Ammonium Molybdate, Ammonium Nitrate, Calcium Carbonate, Calcium Nitrate, Cobalt Nitrate, Copper EDTA, Iron DTPA, Iron EDDHA, Iron EDTA, Manganese EDTA, Potassium Borate, Potassium Nitrate, Urea, and Zinc EDTA

  • Total Nitrogen (N) 5.0%
    • 0.3% Ammoniacal Nitrogen
    • 4.7% Nitrate Nitrogen
  • Soluble Potash (K2O) 1.0%
  • Calcium (Ca) 5.0%
  • Boron (B) 0.01%
  • Cobalt (Co) 0.0005%
  • Copper (Cu) 0.01%
    • 0.01% Chelated Copper (Cu)
  • Iron (Fe) 0.1%
    • 0.1% Chelated Iron (Fe)
  • Manganese (Mn) 0.05%
    • 0.05% Chelated Manganese (Mn)
  • Molybdenum (Mo) 0.0008%
  • Zinc (Zn) 0.015%
    • 0.015% Chelated Zinc (Zn)

Try us on for size(able growth)

The FloraSeries® Trial Pack is a cost efficient opportunity to test out best-in-class nutrients for your grow and learn best practices from our tried and true user guides and tech services team.

FloraMicro®

FloraSeries® Feedcharts

Whether you’re a commercial grower or a hobbyist, the FloraSeries® Feedcharts are the easy and precise way to give your plants what they need, when they need it, without the guesswork. Download them today for a better grow tomorrow.

General-Hydroponics_render-ipads-feedcharts-floraseries-2400px

Grow like a pro

Explore the most comprehensive offering of commercial growing solutions tailored to support your entire operation end-to-end and get the greatest possible returns while staying one step ahead of the competition.

Getting started

Learn from the best

FAQs

View all FAQs
  • Yes! FloraSeries® is perfect for hobby and commercial growers alike. Because FloraSeries® components are in liquid form, you can quickly mix nutrient solutions at any scale, while maintaining precise nutrient ratios.

  • The concept behind FloraSeries® is simple: Different plants have significantly different nutrient needs, which change during each plant’s growth cycle. By using various combinations of FloraGro®, FloraBloom® and FloraMicro®, the grower can fulfill the plant’s exact needs at each stage in the plant’s life cycle. As the crop grows, the grower can precisely adapt the nutrient formulation to meet the crops changing needs.

  • In hydroponics, the plant roots are constantly provided with all the water, oxygen, and nutrients they need. The challenge for the grower is to keep up with the plant’s needs and to avoid damaging it with either excesses or deficiencies of minerals. As a general rule, a plant consumes more nitrogen during the formative or vegetative stage and more phosphorus, potassium, and magnesium as it flowers.

    Throughout its growth cycle, the plant will also consume calcium, sulfur and micro nutrients such as iron, manganese, boron, molybdenum, copper and zinc.

    FloraMicro®, the foundation or “building block” of the FloraSeries system, provides nitrogen, calcium, micronutrients and trace minerals, which are essential for a comprehensive hydroponic plant diet. By adding FloraGro® to FloraMicro, the plant will receive additional nitrogen and potassium, stimulating structural and foliar growth. To stimulate flower and fruit development, FloraBloom® is added to provide the necessary phosphorus, potassium, magnesium, and sulfur.

  • The proper ratio of each FloraSeries® nutrient depends on the crop and the stage of growth (look on the label for specific recommendations for different crops). However, as a rule of thumb we use the “1-2-3” ratio:

  • Never mix the nutrients together in their concentrated form, as this will cause nutrient “lock-out,” making some minerals unavailable. It is best to begin by adding FloraMicro®, stirring well, and then adding FloraGro® and/or FloraBloom®. If both FloraGro® and FloraBloom® are used, add one, stir well, then add the other.

    1. Start with a reservoir of fresh water, adding concentrates one at a time and thoroughly stirring each one in to prevent nutrient lockout. Shake each bottle well before pouring.
    2. If using any silicon products, like Armor Si, add them to your reservoir first.
    3. Next add any calcium sources – start with supplements, like CALiMAGic™. Following any supplements, add FloraMicro®, which also contains calcium.
    4. If using FloraBloom®, or any other bloom supplements that contain phosphorus, like Purpinator® / Terpinator®, add it following your calcium products.
    5. If using FloraGro®, add it to your reservoir now.
    6. Any additional supplements can typically be added in any order at this point, except organics, like Floralicious®, which should be added last.
    7. Adjust pH to match the recommended range for the crop you’re growing.

    Refer to feedcharts for guidance on measurements by growth stage.

    Be sure to watch Jesse walk you through the process of mixing FloraSeries® here ⟶

  • An unopened bottle, properly stored (cool environment, out of sunlight, sealed container), can last for many years.

    Once opened, we still recommend storing in a cool, dark place, but encourage growers to use the bottle within 6 months.

  • Only crops grown from unrefined minerals are recognized as “organic”. The trouble is unrefined minerals do not dissolve well for hydroponic use and some of these unrefined minerals contain quantities of impurities, some of which are toxic to plants. For that reason, FloraBloom®, FloraGro®, and FloraMicro® are made from high quality refined minerals. This ensures high quality crop production, but prevents the crop from being considered “organic”.

Yes! FloraSeries® is perfect for hobby and commercial growers alike. Because FloraSeries® components are in liquid form, you can quickly mix nutrient solutions at any scale, while maintaining precise nutrient ratios.

The concept behind FloraSeries® is simple: Different plants have significantly different nutrient needs, which change during each plant’s growth cycle. By using various combinations of FloraGro®, FloraBloom® and FloraMicro®, the grower can fulfill the plant’s exact needs at each stage in the plant’s life cycle. As the crop grows, the grower can precisely adapt the nutrient formulation to meet the crops changing needs.

In hydroponics, the plant roots are constantly provided with all the water, oxygen, and nutrients they need. The challenge for the grower is to keep up with the plant’s needs and to avoid damaging it with either excesses or deficiencies of minerals. As a general rule, a plant consumes more nitrogen during the formative or vegetative stage and more phosphorus, potassium, and magnesium as it flowers.

Throughout its growth cycle, the plant will also consume calcium, sulfur and micro nutrients such as iron, manganese, boron, molybdenum, copper and zinc.

FloraMicro®, the foundation or “building block” of the FloraSeries system, provides nitrogen, calcium, micronutrients and trace minerals, which are essential for a comprehensive hydroponic plant diet. By adding FloraGro® to FloraMicro, the plant will receive additional nitrogen and potassium, stimulating structural and foliar growth. To stimulate flower and fruit development, FloraBloom® is added to provide the necessary phosphorus, potassium, magnesium, and sulfur.

The proper ratio of each FloraSeries® nutrient depends on the crop and the stage of growth (look on the label for specific recommendations for different crops). However, as a rule of thumb we use the “1-2-3” ratio:

Never mix the nutrients together in their concentrated form, as this will cause nutrient “lock-out,” making some minerals unavailable. It is best to begin by adding FloraMicro®, stirring well, and then adding FloraGro® and/or FloraBloom®. If both FloraGro® and FloraBloom® are used, add one, stir well, then add the other.

  1. Start with a reservoir of fresh water, adding concentrates one at a time and thoroughly stirring each one in to prevent nutrient lockout. Shake each bottle well before pouring.
  2. If using any silicon products, like Armor Si, add them to your reservoir first.
  3. Next add any calcium sources – start with supplements, like CALiMAGic™. Following any supplements, add FloraMicro®, which also contains calcium.
  4. If using FloraBloom®, or any other bloom supplements that contain phosphorus, like Purpinator® / Terpinator®, add it following your calcium products.
  5. If using FloraGro®, add it to your reservoir now.
  6. Any additional supplements can typically be added in any order at this point, except organics, like Floralicious®, which should be added last.
  7. Adjust pH to match the recommended range for the crop you’re growing.

Refer to feedcharts for guidance on measurements by growth stage.

Be sure to watch Jesse walk you through the process of mixing FloraSeries® here ⟶

An unopened bottle, properly stored (cool environment, out of sunlight, sealed container), can last for many years.

Once opened, we still recommend storing in a cool, dark place, but encourage growers to use the bottle within 6 months.

Only crops grown from unrefined minerals are recognized as “organic”. The trouble is unrefined minerals do not dissolve well for hydroponic use and some of these unrefined minerals contain quantities of impurities, some of which are toxic to plants. For that reason, FloraBloom®, FloraGro®, and FloraMicro® are made from high quality refined minerals. This ensures high quality crop production, but prevents the crop from being considered “organic”.

We use cookies to provide necessary site functionality and improve your experience. By using our website, you agree to our privacy policy and our conditions of use.

Privacy policy Accept