Flora Series

  • FloraMicro® (Hardwater) Product Label

    FloraMicro® (Hardwater) Product Label

  • FloraMicro® Product Label

    FloraMicro® Product Label

  • FloraMicro® (Hardwater) Safety Data Sheet

    FloraMicro® (Hardwater) Safety Data Sheet

  • FloraMicro® Safety Data Sheet

    FloraMicro® Safety Data Sheet

  • NutrientEC (milliSiemens/cm)TDS meter (NaCl standard)
  • The concept behind FloraSeries® is simple: Different plants have significantly different nutrient needs, which change during each plant’s growth cycle. By using various combinations of FloraGro®, FloraBloom® and FloraMicro®, the grower can fulfill the plant’s exact needs at each stage in the plant’s life cycle. As the crop grows, the grower can precisely adapt the nutrient formulation to meet the crops changing needs.

  • In hydroponics, the plant roots are constantly provided with all the water, oxygen, and nutrients they need. The challenge for the grower is to keep up with the plant’s needs and to avoid damaging it with either excesses or deficiencies of minerals. As a general rule, a plant consumes more nitrogen during the formative or vegetative stage and more phosphorus, potassium, and magnesium as it flowers.

    Throughout its growth cycle, the plant will also consume calcium, sulfur and micro nutrients such as iron, manganese, boron, molybdenum, copper and zinc.

    FloraMicro®, the foundation or “building block” of the FloraSeries system, provides nitrogen, calcium, micronutrients and trace minerals, which are essential for a comprehensive hydroponic plant diet. By adding FloraGro® to FloraMicro, the plant will receive additional nitrogen and potassium, stimulating structural and foliar growth. To stimulate flower and fruit development, FloraBloom® is added to provide the necessary phosphorus, potassium, magnesium, and sulfur.

  • Never mix the nutrients together in their concentrated form, as this will cause nutrient “lock-out,” making some minerals unavailable. It is best to begin by adding FloraMicro®, stirring well, and then adding FloraGro® and/or FloraBloom®. If both FloraGro® and FloraBloom® are used, add one, stir well, then add the other.

    1. Start with a reservoir of fresh water, adding concentrates one at a time and thoroughly stirring each one in to prevent nutrient lockout. Shake each bottle well before pouring.
    2. If using any silicon products, like Armor Si, add them to your reservoir first.
    3. Next add any calcium sources – start with supplements, like CALiMAGic™. Following any supplements, add FloraMicro®, which also contains calcium.
    4. If using FloraBloom®, or any other bloom supplements that contain phosphorus, like Purpinator® / Terpinator®, add it following your calcium products.
    5. If using FloraGro®, add it to your reservoir now.
    6. Any additional supplements can typically be added in any order at this point, except organics, like Floralicious®, which should be added last.
    7. Adjust pH to match the recommended range for the crop you’re growing.

    Refer to feedcharts for guidance on measurements by growth stage.

    Be sure to watch Jesse walk you through the process of mixing FloraSeries® here ⟶

  • Uncategorized
  • Only crops grown from unrefined minerals are recognized as “organic”. The trouble is unrefined minerals do not dissolve well for hydroponic use and some of these unrefined minerals contain quantities of impurities, some of which are toxic to plants. For that reason, FloraBloom®, FloraGro®, and FloraMicro® are made from high quality refined minerals. This ensures high quality crop production, but prevents the crop from being considered “organic”.


We use cookies to provide necessary site functionality and improve your experience. By using our website, you agree to our privacy policy and our conditions of use.

Privacy policy Accept