Skip to content

Search for:

Products
Articles
Commercial growers
Feedcharts
Our story
Where to buy

Products
Articles
Commercial growers
Feedcharts
Our story
Where to buy

FAQs
Glossary
Documentation
Videos

https://www.facebook.com/GenHydroFind us on Facebook
generalhydroponics Find us on Instagram
https://www.youtube.com/channel/UC9r52S4RX4A9SIDUNXnbUugSubscribe to our YouTube channel

pH Test Kit Product Label

pH Test Kit Product Label

Product labels Calibration Solution Maintenance pH Product Label Test Kit

General-Hydroponics_label_ph_test_indicator Download pdf

Grow with us

View all products

FloraBlend®

Details
pH 4.01 Calibration Solution

Details
pH Test Kit

Details
Prevasyn™

Details

View all products

All amounts per 3.79 liters (1 US gallon)

Conversion chart

2.5 ml = 0.5 teaspoon
5 ml = 1 teaspoon
3.785 l = 1 gallon

Recirculating Nutrient Solution Tips

Keep nutrient solution temperature below 75F (24 C)
Change nutrient solution every 7-10 days and top off with fresh water between nutrient changes
For best results maintain nutrient solution pH between 5.5-6.5
Keep nutrient solution aerated

Trouble – shooting factors to consider

Troubleshooting factors to consider

Arid, bright, hot environments cause plants to drink more than if they are grown where it’s humid, dim and cool. Thus gardeners should use less concentrated nutrient solutions when growing conditions are more intense in order to lessen the risk of overfeeding.
The pH (acidity or alkalinity) of a nutrient solution affects the availability of the elements contained within. Use GH pH adjusters to maintain nutrient pH between 5.5-6.5

Frequently asked questions

Where can I go to learn more about feedcharts?

Our Feedchart Usage Guide explains how to interpret and use General Hydroponics® Pro Feedcharts. It is intended as a companion piece to General Hydroponics® Pro feedcharts for FloraPro®, FloraSeries®, and Maxi Series™.

Can GH nutrients be used in soil?

Absolutely! All of our nutrient blends contain the necessary elements for plant growth. Start with the formula ratios identified on the label for the specific plant or crop you are growing, and then adjust and experiment until you find the right formula for your specific need.

For further information, refer to our feedcharts.

Can you explain pH in a little more detail?

pH is a measure of the hydronium ion H3O+. It is based on a logarithmic scale from 0 to 14. “Pure” water has a pH of 7.0. If the pH is less than 7, the solution is acid. If the pH is greater than 7 it is alkaline. Because the scale is logarithmic and not linear, a pH of 6 indicates ten times more H protons than a pH of 7, and a pH of 5 indicates 10 times more protons than a pH of 6.

How does fresh air affect plant growth?

Ventilation is often overlooked as a problem. Plants absorb nutrients when the water molecules in the leaves respire (i.e. evaporate). Better ventilation aids a high transpiration rate, which translates into a greater rate of nutrient uptake. Remember that ventilation means changing the air, not just blowing it around the room (circulation).

How does pH level affect plant growth?

pH is important because it affects availability and absorption of several of the 16 atomic elements needed for plant growth. Maximum absorption of these elements is found at pH readings 5.5 to 6.5. When pH falls below this range many of the macro elements (N, P, K) have less availability, and absorption of the micro nutrients can reach toxic levels.

How important is water quality in hydroponics?

Water containing too much calcium and magnesium (called “total Hardness”) may create serious problems. Contact your municipal water supplier who can provide you with an analysis of your water supply. If you are using well water, many laboratories can provide you with an analysis if you send them a sample. If the dissolved salts in your water supply measure 200 ppm or more, we strongly recommend that you obtain a water analysis to determine calcium content. Excessive calcium is the main factor in determining if your water is hard. If an analysis of your water supply reveals that the Calcium content of your water supply is greater than 70 ppm (mg/liter) you should use Hardwater FloraMicro. Hardwater FloraMicro provides rapidly growing plants with a combination of chelated micro nutrients uniquely formulated for hardwater conditions. Other options are to collect rainwater, install a reverse osmosis filtration system, or use purified water. Do not use mineral or “spring” water, which can unbalance the nutrient solution, or even be toxic to plants.

General Hydroponics

We are the leading innovator in the field of hydroponics for more than 40 years. We share your passion for plants — whether you’re growing hemp, vegetables, fruits, herbs or other high value crops. That’s how we got our start, and that’s what keeps driving us forward.

Our story

Grow with us

Products
Nutrients
Supplements
Maintenance
Controls
General Organics
Commercial growers

Resources
Articles
Feedcharts
FAQs
Glossary

About
Our story
Contact us
Careers
Warranty
Supply Chain

Conditions of Use
Conditions of Use
Privacy Notice
About Cookies
About Interest Based Ads
Do Not Sell My Personal Information

1-888-808-4826
[email protected]

© Copyright 2025. All rights reserved.

https://www.facebook.com/GenHydroFind us on Facebook
generalhydroponics Find us on Instagram
https://www.youtube.com/channel/UC9r52S4RX4A9SIDUNXnbUugSubscribe to our YouTube channel