FloraBlend®

Vegan Plant Booster General Hydroponics View available resources

FloraBlend 0.5-1-1 is a blend of plant nutrients designed for hydroponic growing. FloraBlend can be used when growing in coco coir, hydroponics or soil. FloraBlend can be used in addition to your regular fertilizer program from germination through ripening.

Available sizes

FloraBlend® is a compost tea that is fermented from a proprietary blend of plant materials, plus seaweed, rock powders and micronized leonardite

FloraBlend® is a vegan product and contains no animal derived ingredients

FloraBlend® is very clean product that can be utilized in all hydroponic systems

For use with

Plants

  • Hemp
  • Vegetables
  • Herbs
  • Fruits
  • Flowers
  • Other high value crops

Media

  • Potting mix
  • Coco
  • Peat lite mix
  • In-ground soil

Guaranteed analysis

  • n0.5
  • p1
  • k1

Derived from: Alfalfa meal, brewers yeast, cottonseed meal, potassium sulfate, rock phosphate, sea kelp, soybean meal.

  • Total Nitrogen (N) 0.5%
    • 0.02% Water Insoluble Organic Nitrogen
    • 0.48% Water Soluble Organic Nitrogen
  • Available Phosphate (P2O5) 1%
  • Soluble Potash (K2O) 1%

Grow like a pro

Explore the most comprehensive offering of commercial growing solutions tailored to support your entire operation end-to-end and get the greatest possible returns while staying one step ahead of the competition.

Getting started

Learn from the best

FAQs

View all FAQs
  • Our Feedchart Usage Guide explains how to interpret and use General Hydroponics Pro Feedcharts. It is intended as a companion piece to General Hydroponics Pro feedcharts for FloraPro, Flora Series, Cocotek and Maxi Series.

  • Absolutely! All of our nutrient blends contain the necessary elements for plant growth. Start with the formula ratios identified on the label for the specific plant or crop you are growing, and then adjust and experiment until you find the right formula for your specific need.

    For further information, refer to our feed charts.

  • pH is a measure of the hydronium ion H3O+. It is based on a logarithmic scale from 0 to 14. “Pure” water has a pH of 7.0. If the pH is less than 7, the solution is acid. If the pH is greater than 7 it is alkaline. Because the scale is logarithmic and not linear, a pH of 6 indicates ten times more H protons than a pH of 7, and a pH of 5 indicates 10 times more protons than a pH of 6.

  • Ventilation is often overlooked as a problem. Plants absorb nutrients when the water molecules in the leaves respire (i.e. evaporate). Better ventilation aids a high transpiration rate, which translates into a greater rate of nutrient uptake. Remember that ventilation means changing the air, not just blowing it around the room (circulation).

  • pH is important because it affects availability and absorption of several of the 16 atomic elements needed for plant growth. Maximum absorption of these elements is found at pH readings 5.5 to 6.5. When pH falls below this range many of the macro elements (N, P, K) have less availability, and absorption of the micro nutrients can reach toxic levels.

  • Water containing too much calcium and magnesium (called “total Hardness”) may create serious problems. Contact your municipal water supplier who can provide you with an analysis of your water supply. If you are using well water, many laboratories can provide you with an analysis if you send them a sample. If the dissolved salts in your water supply measure 200 ppm or more, we strongly recommend that you obtain a water analysis to determine calcium content. Excessive calcium is the main factor in determining if your water is hard. If an analysis of your water supply reveals that the Calcium content of your water supply is greater than 70 ppm (mg/liter) you should use Hardwater FloraMicro. Hardwater FloraMicro provides rapidly growing plants with a combination of chelated micro nutrients uniquely formulated for hardwater conditions. Other options are to collect rainwater, install a reverse osmosis filtration system, or use purified water. Do not use mineral or “spring” water, which can unbalance the nutrient solution, or even be toxic to plants.

Our Feedchart Usage Guide explains how to interpret and use General Hydroponics Pro Feedcharts. It is intended as a companion piece to General Hydroponics Pro feedcharts for FloraPro, Flora Series, Cocotek and Maxi Series.

Absolutely! All of our nutrient blends contain the necessary elements for plant growth. Start with the formula ratios identified on the label for the specific plant or crop you are growing, and then adjust and experiment until you find the right formula for your specific need.

For further information, refer to our feed charts.

pH is a measure of the hydronium ion H3O+. It is based on a logarithmic scale from 0 to 14. “Pure” water has a pH of 7.0. If the pH is less than 7, the solution is acid. If the pH is greater than 7 it is alkaline. Because the scale is logarithmic and not linear, a pH of 6 indicates ten times more H protons than a pH of 7, and a pH of 5 indicates 10 times more protons than a pH of 6.

Ventilation is often overlooked as a problem. Plants absorb nutrients when the water molecules in the leaves respire (i.e. evaporate). Better ventilation aids a high transpiration rate, which translates into a greater rate of nutrient uptake. Remember that ventilation means changing the air, not just blowing it around the room (circulation).

pH is important because it affects availability and absorption of several of the 16 atomic elements needed for plant growth. Maximum absorption of these elements is found at pH readings 5.5 to 6.5. When pH falls below this range many of the macro elements (N, P, K) have less availability, and absorption of the micro nutrients can reach toxic levels.

Water containing too much calcium and magnesium (called “total Hardness”) may create serious problems. Contact your municipal water supplier who can provide you with an analysis of your water supply. If you are using well water, many laboratories can provide you with an analysis if you send them a sample. If the dissolved salts in your water supply measure 200 ppm or more, we strongly recommend that you obtain a water analysis to determine calcium content. Excessive calcium is the main factor in determining if your water is hard. If an analysis of your water supply reveals that the Calcium content of your water supply is greater than 70 ppm (mg/liter) you should use Hardwater FloraMicro. Hardwater FloraMicro provides rapidly growing plants with a combination of chelated micro nutrients uniquely formulated for hardwater conditions. Other options are to collect rainwater, install a reverse osmosis filtration system, or use purified water. Do not use mineral or “spring” water, which can unbalance the nutrient solution, or even be toxic to plants.